2001-2005 - PREM Lab.
| 번호 | 저자 | 논문제목 | 학회명 | 게재일 |
51 |
G. H. Jang C. H.Seo |
Vibration analysis of a flexible spining disk-spindle system considering the flexiblity of supporting structures and an actuator in a HDD | APVC | 2005 11/23-11/25 |
| 50 | G. H. Jang C. J. Lee |
Design and control of the phase current of a brushless DC motor to eliminate cogging torque | MMM Conference | 2005 10/30-11/03 |
| 49 | G. H. Jang S. H. Lee H. W. Kim |
Finite element analysis of coupled journal and thrust bearings in a computer hard disk drive | ASME/ISPS conference | 2005 06/28-06/29 |
| 48 | G. H. Jang C. H.Seo H. S. Lee |
Forced vibration analysis of a rotating disk-spindle system in a HDD by using finite element method and mode superposition | ASME/ISPS conference | 2005 06/28-06/29 |
| 47 | G. H. Jang S. J. Park |
Sensorless detection of free-falling state of a HDD by monitoring electromechanical signal of a spindle motor | Intermag 2005 | 2005 04/04-04/08 |
| 46 | G. H. Jang C. I. Lee |
Development of a winding method and an inverter circuit to drive a BLDC motor at high speed with large starting torque | Intermag 2005 | 2005 04/04-04/08 |
| 45 | J. S. Park G. H. Jang |
Development of a highly efficient HDD spindle motor with a passive magnetic thrust bearing and a hydrodynamic journal bearing | MMM Conference | 2004 11/07-11/11 |
| 44 | Y. B. LEE S. K. Shin K. Ryu C. H. Kim G. H. Jang |
Test results for leakage and rotordynamic coefficients of floating ring seals in a high pressure | ASME/STLE | 2004 10/24-10/27 |
| 43 | G. H. Jang M. G. Kim |
A bipolar-startinjavascript:productSendit();g and unipolar-running method to drive a HDD spindle motor at high speed with large starting torque | APMRC/IEEE | 2004 08/16-08/19 |
| 42 | G. H. Jang S. H. LEE H. W. Kim C. S. Kim |
Dynamic analysis of a FDB spindle system due to the bearing width and asymmetric grooves of journal bearing | ASME/ISPS | 2004 06/14-06/16 |
| 41 | G. H. Jang J. H. Han C. H. Seo |
Finite element modal analysis of a rotating disk-spindle system in a HDD with hydrodynamic bearings considering the flexibility of a complicated supporting structure | ASME/ISPSconference | 2004. 06/14-06/16 |
| 40 | G. H. Jang S. J. Park S. H. Lee |
Finite element analysis of electromechanical field of a BLDC motor due to temperature variation | The 9th Joint MMM/Intermag Conference | 2004.01/05-01/09 |
| 39 | G. H. Jang S. J. Park |
Characterization of a single phase induction motor due to the effect of slot opening | The 9th Joint MMM/Intermag Conference | 2004.01/05-01/09 |
| 38 | G. H. Jang S. H. Oh S. H. Lee |
Experimental study on whirling, flying and tilting motion of a 3.5 | The 4th TISD Conference | 2003.12/01-12/03 |
| 37 | G. H. Jang K. S. Kim H. S. Lee C. S. Kim |
Analysis of a hydrodynamic bearing of a HDD spindle motor at elevated temperature | ASME/STLE 2003 | 2003.10/24-10/26 |
| 36 | D. J. Baek Y. B. Lee S. J. Kim C. H. Kim H. D. Kwak G. H. Jang |
A fuzzy expert system for fault diagnosis of rotating machinery | Internoise 2003 | 2003.08/25-08/28 |
| 35 | G. H. Jang D. K. Kim C. S.Kim H. S. Lee |
Improvement of dynamic characteristics of a HDD spindle system supported by ball bearing due to temperature variation | ASME/ISPS | 2003.06 |
| 34 | G. H. Jang J. H. Han |
Finied element modal analysis of a spinning flexible disk-spindle system in a HDD considering the flexibility of supporting structure | ASME/ISPS | 2003.06 |
| 33 | G. H. Jang S. J. Park |
Prediction of the electromechanical faults in a single phase squirrel cage induction motor | Intermag 2003 | 2003.03/28-04/03 |
| 32 | G. H. Jang M. G. Kim H. Y. Kim |
A bipolar-starting and unipolar-running method to drive a brusshless DC motor in high speed with large starting torque | Intermag 2003 | 2003.03/28-04/03 |
| 31 | G. H. Jang J. W. Yoon |
Stability analysis of hydrodynamic journal bearing with rotating herringbone grooves | ASME/ STLE | 2002.10 |
| 30 | G. H. Jang S.W. Jeong |
Stability analysis of a rotating system due to the effect of ball bearing waviness | ASME/ STLE | 2002.10 |
| 29 | G. H. Jang K. S. Kim |
Development of an ultra-slim spindle motor for a 3.3-mm-height CF type 1 disk drive | IEEE/ APMRC | 2002.08 |
| 28 | D. K. Kim | Analysis of dynamic characteristics of a HDD spindle system due to temperature rise | ASME/ ISPS | 2002.06 |
| 27 | G. H. Jang J. H. Chang |
Development of an axial-gap spindle motor for computer hard disk drives using PCB and dual airgap | Intermag 2002 | 2001.10 |
| 26 | Y. B. Lee H. D. Kwak C. H. Kim G. H. Jang |
Analysis of gas-lubricated bearings with a coupled boundary effect for micro gas turbin | ASME/ STLE | 2001.10 |
| 25 | G. H. Jang S.W. Jeong |
Nonlinear excitation model of ball bearing waviness in a rigid rotor supported by two or more ball bearings considering five degrees of freedom | ASME/ STLE | 2001.10 |
| 24 | G. H. Jang S.W. Jeong |
Nonlinear excitation model of ball bearing waviness in a rigid rotor supported by two or more ball bearings considering five degrees of freedom | ASME/ STLE | 2001.10 |
| 23 | G. H. Jang J. H. Chang |
Development of a printed coil spindle motor for a computer hard disk drive | IMCSD | 2001.07 |
| 22 | G. H. Jang S. J. Park |
Investigation of the electromechanical characteristics in a squirrel cage induction motor due to broken bars and mass unbalence of a rotorr | Compumag | 2001.07 |
| 21 | G. H. Jang J. H. Chang |
Finite element analysis of magnetic and mechanical field of a BLDC motor considering the speed control with PWM | Compumag | 2001.07 |
| 20 | G. H. Jang D. K. Kim |
The study in the development of 200KW 10,000rpm induction motor for dynamo system of the motor and engine | Compumag | 2001.07 |
| 19 | G. H. Jang J. W. Yoon |
Dynamic characteristics of a coupled journal and thrust hydrodynamic bearing in a HDD spindle system Due to its groove location | ASME/ ISPS | 2001.06 |
| 18 | G. H. Jang J. H. Chang |
Effect of the magnetization pattern of permanent magnet on the performance of BLDC motors | Intermag | 2001.01 |